SYNCO G2(A1) Pro Wireless Microphone System

SYNCO G2(A1) Pro is a 2.4GHz Wireless Lavalier Microphone System, Transmitter with Receiver

SYNCO G2(A1) PRO 2.4GHz Wireless Lavalier Microphone System, Transmitter with Receiver, Safe Audio Track, Adjustable Recording, Magetic Back Clip, and Real-time Monitoring

Wireless Microphone for Mobile and Cams

The SYNCO G2-A1 PRO Wireless Microphone System is ideal for content creators and mobile journalists utilizing multiple devices to record interviews and vlogs due to the system's wide compatibility from DSLR and mirrorless cameras to smartphones and mobile devices.

The system features a single transmitter with built-in microphone, a dual-channel receiver, a lavalier microphone, and a charging case to hold the devices and replenish their battery.

The compact, dual-channel receiver features both a 3.5mm TRS and a USB-C output to deliver digital or analog signals to your camera, audio recorder, or smartphone. Included 3.5mm TRRS, TRS, and USB-C cables help facilitate these connections. You can even use the USB-C to USB-A adapter in tandem with the 3.5mm headphone output to plug the receiver into your laptop and monitor your system in real-time

Features

• Safe Audio Track For More Protection: The right channel of G2 Pro is 6dB smaller to avoid sound blasting and howling
• Intelligent Noise Reduction For Better Sound Quality: Active noise reduction once the transmitter recording , SNR(Signal to Noise Ratio) up to 80dB.
• Upgrade The Digital Output for Wider Compatibility: Digital output port can be highly compatible to mobile phones, cameras, tablets and other devices
• TFT real color display for Recording status displayed in real time: TFT screen shows all kinds of current recording situations in real time with delicate and vivid image, which can High refresh rate
• Syncoder 4.0 For More Stable 200m- Transmission: Syncoder 4.0 improves the signal transmission stability and audio fluency in complex surroundings
• Upgrade The Magnetic Back Clip for imperceptible recording: Real-time digital monitoring Upgrade digital monitor that he receiver can not only "hear" the radio from the transmitter, but also from the input of devices.
• Charging & Storage Case For Contact Power Charging: Upgraded power management chip with low consumption that fully charged in 2 hours and battery life for 8 hours.

Specifications

Transmitter (TX )

Wireless Transmission – Digital 2.4GHz

RF Frequency Band – 2400-2483.5MHz

Working Distance – 492ft/150m(LOS area); 164ft/50m(NLOS area)

Sampling Rate – 48KHz

Bit Depth – 16Bit

SNR. ﹥75dB

Audio Input – 1/8″ / 3.5mm TRS Mic Input

RF Output Power – 20dB

Power Requirements – 3.3V-4.7V

Battery Type – Built-in Lithium Battery, 400mAh

Charging Port – USB-C

Battery Charging Time – 1.5h

Battery Life – 8h

Dimensions – 52×42×16mm

Material – ABS

Weight – 35g

Receiver (RX)

Antenna – Built-in

Number of Audio Channels – 2

Monitoring – 3.5mm In-Ear Monitoring

Audio Output – Lightning/ Type-C Output

Gain – 0-3 Level

Power Requirements – 5V 1A

Dimensions – 55X31X13mm

Weight – 12g

Microphone

Form Factor – Built-in Mic

Sound Field – Mono

Polar Pattern – Omnidirectional

Frequency Response – 50Hz-20KHz

Sensitivity -42dB (±3dB, re 1V/Pa at 1KHz)

Max. Input SPL – 110dB SPL (at 1KHz)

What's in the Box

• TX Transmitter x 1
• RX Receiver x 1
• Eject Pin x 1
• 3.5mm TRRS smartphone cable x 1
• 3.5mm TRS camera cable x 1
• Type C to Type A Adapter
• USB C Charging Cable x 1
• External Lav Mic (with Wind Muff) x 1
• Furry Windshield x 1
• Carrying Charging Case x 1
• Instruction manual x 1